Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 1009, listelenen: 514-533
-
PAAm-Kappa Carrageenan Composites: Drying and Swelling with Various Kappa Carrageenan Contents
(Polish Acad Sciences Inst Physics, 2012)The purpose of this study is to discuss the role of kappa-carrageenan (kappa-car) in the drying and swelling of polyacrylamide (PAAm)-kappa-car composite. The fluorescence intensity of pyranine increased and decreased as ... -
Parabolization and structural integrity of side bulb applied to a platform supply vessel
(DTU Mechanical Engineering, Technical University of Denmark, 2016)The waterline parabolization is a hull form-optimization method, Calisal et al. (2002) reported a 10% decrease in the effective horse power at Fr = 0.275 for a coaster tanker. The present study was made for an oil platform ... -
Particle-flow reconstruction and global event description with the CMS detector
(Iop Publishing Ltd, 2017)The CMS apparatus was identified, a few years before the start of the LHC operation at CERN, to feature properties well suited to particle-flow (PF) reconstruction: a highly-segmented tracker, a fine-grained electromagnetic ... -
Perceptual image quality assessment technique for color images based on hsi colour space
(Institute of Advanced Engineering and Science, 2020)A new full-reference Perceptual Image Quality Assessment (PIQA) technique based on Hue-Saturation-Intensity (HSI) transformation method for colour images is offered in this work. Fundamentally, it is combined with three ... -
Performance of electron reconstruction and selection with the CMS detector in proton-proton collisions at root s=8 TeV
(Iop Publishing Ltd, 2015)The performance and strategies used in electron reconstruction and selection at CMS are presented based on data corresponding to an integrated luminosity of 19.7 fb(-1), collected in proton-proton collisions at root s = ... -
Performance of missing transverse momentum reconstruction in proton-proton collisions at root s=13 TeV using the CMS detector
(Iop Publishing Ltd, 2019)The performance of missing transverse momentum ((p) over right arrow (miss)(T)) reconstruction algorithms for the CMS experiment is presented, using proton-proton collisions at a center-of-mass energy of 13 TeV, collected ... -
Performance of photon reconstruction and identification with the CMS detector in proton-proton collisions at root s=8TeV
(Iop Publishing Ltd, 2015)A description is provided of the performance of the CMS detector for photon reconstruction and identification in proton-proton collisions at a centre-of-mass energy of 8 TeV at the CERN LHC. Details are given on the ... -
Performance of reconstruction and identification of tau leptons decaying to hadrons and nu(tau) in pp collisions at root s=13 TeV
(Iop Publishing Ltd, 2018)The algorithm developed by the CMS Collaboration to reconstruct and identify tau leptons produced in proton-proton collisions at root s = 7 and 8 TeV, via their decays to hadrons and a neutrino, has been significantly ... -
Performance of the CMS Level-1 trigger in proton-proton collisions at root s=13 TeV
(Iop Publishing Ltd, 2020)At the start of Run 2 in 2015, the LHC delivered proton-proton collisions at a center-ofmass energy of 13 TeV. During Run 2 (years 2015-2018) the LHC eventually reached a luminosity of 2.1 x 10(34) cm(-2) s(-1), almost ... -
Performance of the CMS muon detector and muon reconstruction with proton-proton collisions at root s=13 TeV
(Iop Publishing Ltd, 2018)The CMS muon detector system, muon reconstruction software, and high-level trigger underwent significant changes in 2013-2014 in preparation for running at higher LHC collision energy and instantaneous luminosity. The ... -
Performance of the CMS muon trigger system in proton-proton collisions at root s=13 TeV
(IOP Publishing, 2022)The muon trigger system of the CMS experiment uses a combination of hardware and software to identify events containing a muon. During Run 2 (covering 2015-2018) the LHC achieved instantaneous luminosities as high as 2 x ... -
Performance of the CMS muon trigger system in proton-proton collisions at √s = 13 TeV
(IOP Publishing, 2021)The muon trigger system of the CMS experiment uses a combination of hardware and software to identify events containing a muon. During Run 2 (covering 2015-2018) the LHC achieved instantaneous luminosities as high as 2 × ... -
Performance of the reconstruction and identification of high-momentum muons in proton-proton collisions at root s=13 TeV
(Iop Publishing Ltd, 2020)The CMS detector at the LHC has recorded events from proton-proton collisions, with muon momenta reaching up to 1.8 TeV in the collected dimuon samples. These high-momentum muons allow direct access to new regimes in physics ... -
Perspectives from a Maritime University's female faculty: From queen bees to gentle mermaids or white sharks
(IGI Global, 2023)Relations among women have always been complex. However, this complexity varies depending on the context and the people involved. Relationships that gain different characteristics in male-dominated environments take on an ... -
Phenomenological MSSM interpretation of CMS searches in pp collisions at root s=7 and 8 TeV
(Springer, 2016)Searches for new physics by the CMS collaboration are interpreted in the framework of the phenomenological minimal supersymmetric standard model (pMSSM). The data samples used in this study were collected at root s = 7 and ... -
Phononic crystal surface mode coupling and its use in acoustic Doppler velocimetry
(Elsevier Science Bv, 2016)It is numerically shown that surface modes of two-dimensional phononic crystals, which are Bloch modes bound to the interface between the phononic crystal and the surrounding host, can couple back and forth between the ... -
Photocurable pentaerythritol triacrylate/lithium phenyl-2,4,6-trimethylbenzoylphosphinate-based ink for extrusion-based 3D printing of magneto-responsive materials
(Wiley, 2020)Recent advances in additive manufacturing made it feasible to fabricate products with desired shapes and features. Herein, a new, photocurable 3D printer ink mainly based on pentaerythritol triacrylate (PETA) is reported. ... -
Photoluminescence properties of Pr-doped LaAsO4: An experimental and theoretical study employing density functional theory
(Elsevier Ltd, 2024)Praseodymium doped lanthanum arsenate, denoted as La1-xPrxAsO4, has been synthesized with different concentrations of the dopant (x = 0.5 %; 1 %; 2 %; 3 % and 5 %) via the combustion method and their optoelectronic properties ... -
Pileup mitigation at CMS in 13 TeV data
(Iop Publishing Ltd, 2020)With increasing instantaneous luminosity at the LHC come additional reconstruction challenges. At high luminosity, many collisions occur simultaneously within one proton-proton bunch crossing. The isolation of an interesting ... -
Poly(azomethine-imide)s containing siloxane moities: Optical, thermal, mechanical, and morphological properties
(Wiley, 2020)A new series of poly(azomethine-imide)s having siloxane moities in backbone was prepared using different dianhydrides.Thermal, optical, and morphological properties of these polymers were clarified. Also, bulky Symbol of ...