Bölüm "Mühendislik Fakültesi, Makine Mühendisliği Bölümü" Araştırma Çıktıları | TR-Dizin | WoS | Scopus | PubMed için listeleme
Toplam kayıt 93, listelenen: 1-20
-
3D-printed alumina-based ceramics with spatially resolved porosity
(John Wiley and Sons Inc, 2023)The interest on porous ceramics has increased in the last years with the developments in additive manufacturing methods, enabling design of components with complex geometries for membranes, filters, catalytic converters, ... -
Ab initio investigation of structural, elastic, and thermodynamic characteristics of tetragonal XAgO compounds (X = Li, Na, K, Rb)
(Institute of Physics, 2023)The present research utilizes ab initio computations to examine the thermodynamic, structural, and elastic characteristics of XAgO ternary oxides, where X signifies Li, Na, K, and Rb.The GGA-PBE and GGA-WC functionals were ... -
Ab initio predictions of pressure-dependent structural, elastic, and thermodynamic properties of CaLiX3 (X = Cl, Br, and I) halide perovskites
(Elsevier B.V., 2023)In this comprehensive investigation, we undertook an ab initio exploration of the pressure-dependent structural, elastic and thermodynamic attributes of lithium-based halide perovskite compounds, namely CaLiCl3, CaLiBr3 ... -
Ab initio predictions of the structural, electronic, optical, elastic, and thermoelectric properties of quasi-two-dimensional BaFZnP
(Elsevier, 2023)We studied the structural parameters, elasticity, electronic structure, linear optical spectra, and thermoelectric coefficients of quasi-two-dimensional BaFZnP using ab initio methods. The computed equilibrium coordinates ... -
Analysis of the residual stresses and deformations during the autogenous GTAW process
(Emerald Group Publishing Ltd, 2021)Purpose The gas tungsten arc welding (GTAW) process is a widely used process that produces quality weldments. But the high heat generation from the GTAW arc can cause extreme temperatures as high as 20,000 degrees C. The ... -
Combustion synthesis, characterization, and photodegradation performance of La2-xBixCuO4
(Elsevier, 2023)Quaternary metal oxide system of the type, La2-xBixCuO4, where x = 0, 0.01, 0.03, 0.06, 0.08 have been synthesized by the combustion method. The crystalline phases and purity of nanostructures were confirmed by X-ray ... -
The comparison between effects of heterogeneous and homogeneous half-spaces underlying homogeneous layer on solitary Love waves
(Oxford University Press, 2023)A comparative analysis is performed on the effects of heterogeneity in both linear and non-linear material characteristics of half-space on the propagation of bright and dark solitary Love waves in a non-linear layered ... -
Comparison of Additive Protective Layer On the Cylinder Liner Surface Using Diesel Engine and Pin-On-Plate Test Rigs
(Scibulcom Ltd, 2011)In this research, the layer formation of additives on the surface of cylinder liner (single cylinder Diesel engine liner operated 22 h) was examined by using binocular, optical, scanning electron microscope and energy ... -
Comparison of two base-potentials for a slender-body method
(2012)The effects of two base-potentials on the accuracy of a slender-body method are studied in this paper. In the formulation for this method which is developed for the slender ships, the velocity potential is decomposed into ... -
A Comprehensive Ab Initio Study of the Recently Synthesized Zintl Phase CsGaSb2 Structural, Dynamical Stability, Elastic and Thermodynamic Properties
(Springer, 2024)A comprehensive examination of the crystal structure, as well as elastic and thermal properties, of the recently created Zintl phase CsGaSb2 has been carried out using ab initio density functional theory pseudo-potential ... -
Computational investigation of the structural, elastic, electronic, and thermodynamic properties of chloroperovskites GaXCl3 (X = Be, Ca, or Sr) using DFT framework
(Institute of Physics, 2024)In this study, we employed the pseudopotential plane wave approach to examine the influence of the X atom (X = Be, Ca, or Sr) on the physical properties of isostructural chloroperovskites GaXCl3. The GGA-PBEsol functional ... -
Data-Driven Generative Design Integrated with Hybrid Additive Subtractive Manufacturing (HASM) for Smart Cities
(Springer, 2021)Generation of smart cities that considers environmental pollution, waste management, energy consumption and human activities has become more important in recent years since it was first introduced in the 1990s. In the smart ... -
A Detailed Analysis of Ideal Rankine Steam Cycle
(Amer Soc Naval Eng Inc, 2016)In this theoretical work, the ideal Rankine cycle using water vapor is studied in detail considering a condenser pressure range of 10-80 kPa, a boiler pressure range of 3-15 MPa and a superheater temperature range of 350-600 ... -
Development of an Algorithm to Determine the Liquid Spreading Area of Airlaid Nonwoven Fabrics by Image Processing Method
(Ege Univ, 2020)Today, many quality controls processes that are controlled by Image Processing (IP) technique has achieved state-of-the-art performance for all technology field. The image processing technique, which provides as accurate ... -
DKP37 Sacının Kayar Artımlı Şekillendirme (TPIF_RL) Yöntemiyle Şekillendirme İşleminin Taguchi ve Cevap Yüzey Metodu ile Optimizasyonu
(2019)Artımlı şekillendirme yöntemi metal endüstrisinde kullanılan hızlı ve ucuz bir prototip üretim yöntemidir. Bu yöntem değişik endüstri alanlarında geniş bir kullanım potansiyeline sahiptir. Bu çalışmada; DKP37 sacının TPIF_RL ... -
Effect of Additive Level On the Surface of Diesel Engine Cylinder Liner
(Scibulcom Ltd, 2011)In this research the surface of the cylinder liner was examined from metallurgical standpoints, using specimens cut from real engine component (single cylinder diesel engine liner operated 22 h), in order to identify the ... -
Effect of operational parameters on incremental forming of low-alloy sheet metals and its optimisation
(Taylor & Francis Ltd, 2021)Incremental forming is a method with great forming potential. With this method, especially Low-Alloy Sheet Metals prototypes can be produced. Low-Alloy Sheet DC01, one of the metals, is widely used in the machinery industry. ... -
The effect of surface roughness parameters on frictional properties of AlSi10Mg alloy
(Universidad Nacional Autonoma de Mexico, 2024)Experimental study of the effects of surface roughness parameters and their relationship to the coefficient of friction (COF) on AlSi10Mg alloy. The information demonstrates that the average surface roughness (Ra) directly ... -
Effects of heat treatment on surface integrity and wear performance of Inconel 718 alloy fabricated by laser powder bed fusion process additive manufacturing under different laser power and scanning speed parameters
(Springer, 2023)As with all additive manufacturing processes, selecting appropriate process parameters in the laser powder bed fusion (LPBF) process plays an important role in the surface integrity and mechanical behavior of Inconel 718 ... -
Effects of Nanoparticles on the Mechanical Properties of the Composites Prepared from Biological and Chemical Gels
(Taylor and Francis Ltd., 2024)Poly (N-isopropyl acrylamide) (PNIPAm) and polyacrylamide (PAAm) are widely used in antifouling research because of their non-harmful nature and their high water-absorbing capacity. In addition, hydrogels such as these ...