Ara
Toplam kayıt 27, listelenen: 1-10
A Detailed Analysis of Ideal Rankine Steam Cycle
(Amer Soc Naval Eng Inc, 2016)
In this theoretical work, the ideal Rankine cycle using water vapor is studied in detail considering a condenser pressure range of 10-80 kPa, a boiler pressure range of 3-15 MPa and a superheater temperature range of 350-600 ...
Second-order wave diffraction by horizontal rectangular barriers
(2011)
A complete second-order analytical solution for the nonlinear diffraction of waves by 2-D rectangular cylinders fixed at the free surface of finite-depth waters is presented. As a sequel to a previous linear treatment of ...
Three-parameter (3P) weibull distribution for characterization of strength of ceramics showing R-Curve behavior
(Elsevier Sci Ltd, 2021)
Strength distribution of advanced ceramics is commonly characterized by two-Parameter (2P) Weibull distribution. However, deviation of strength distribution from 2P-Weibull distribution may occur in ceramics due to various ...
Analysis of the residual stresses and deformations during the autogenous GTAW process
(Emerald Group Publishing Ltd, 2021)
Purpose The gas tungsten arc welding (GTAW) process is a widely used process that produces quality weldments. But the high heat generation from the GTAW arc can cause extreme temperatures as high as 20,000 degrees C. The ...
Numerical simulation of pressure loss in porous media in oscillating flow
(World Scientific and Engineering Academy and Society, 2018)
In this study, the pressure loss in two types of porous media for both unidirectional and oscillatory flows is analyzed using commercial software Comsol©. The numerical results are compared with those obtained in the ...
Spacetimes admitting the Z-symmetric tensor
(Natl Inquiry Services Centre Pty Ltd, 2020)
This paper aims to introduce the spacetimes admitting the Z-symmetric tensor. We investigate the properties of these spacetimes for a perfect fluid and a pressureless perfect fluid (a dust). Some theorems about the properties ...
An overview of wire arc additive manufacturing (WAAM) in shipbuilding industry
(Taylor & Francis Ltd, 2020)
Increasing competition in the international shipbuilding industry pushes the naval architect's pressure to reduce the costs of design and manufacturing of new buildings. Using newly developed Additive Manufacturing (AM) ...
An Integrated Approach to Increase Marine Transportation Safety in Harbor Areas
(Marine Technology Soc Inc, 2017)
The importance of marine transportation safety in harbors and waterways access has become a very serious governmental concern in recent years, with the holding of special conferences on major marine disasters, increasing ...
Modeling of twin-turbine systems with vertical axis tidal current turbine: Part II-torque fluctuation
(Pergamon-Elsevier Science Ltd, 2011)
We recently showed the advantage of using a numerical system to extract energy from tidal currents by developing a new twin-turbine model (Li and Calisal, 2010a). Encouraged by this result, we decided to use this model to ...
On flow fluctuation's impact on the performance of vertical axis turbines-A potential flow analysis
(Amer Inst Physics, 2017)
During the last decade, with rapidly increasing deployment of tidal current turbine prototypes in many countries, a number of failures have been reported. Several of these failures were attributed to the intensive flow ...