Başlık için WoS İndeksli Yayınlar Koleksiyonu listeleme
Toplam kayıt 1269, listelenen: 594-613
-
Measurements of the pp → W± γγ and pp → Zγγ cross sections at √s = 13 TeV and limits on anomalous quartic gauge couplings
(Springer Verlag, 2021)The cross section for W or Z boson production in association with two photons is measured in proton-proton collisions at a centre-of-mass energy of 13 TeV. The data set corresponds to an integrated luminosity of 137 fb−1 ... -
Measurements of the t(t)over-bar production cross section in lepton plus jets final states in pp collisions at 8 and ratio of 8 to 7 cross sections
(Springer, 2017)A measurement of the top quark pair production () cross section in proton-proton collisions at the centre-of-mass energy of 8 is presented using data collected with the CMS detector at the LHC, corresponding to an integrated ... -
Measurements of the Upsilon(1S), Upsilon(2S), and Upsilon(3S) differential cross sections in pp collisions at root s=7 TeV
(Elsevier, 2015)Differential cross sections as a function of transverse momentum p(T) are presented for the production of Upsilon(nS) (n = 1, 2, 3) states decaying into a pair of muons. Data corresponding to an integrated luminosity of ... -
Measurements of the W boson rapidity, helicity, double-differential cross sections, and charge asymmetry in pp collisions at root s=13 TeV
(Amer Physical Soc, 2020)The differential cross section and charge asymmetry for inclusive W boson production at root s = 13 TeV is measured for the two transverse polarization states as a function of the W boson absolute rapidity. The measurement ... -
Measurements of triple-differential cross sections for inclusive isolated-photon plus jet events in pp collisions at root s=8 TeV
(Springer, 2019)Measurements are presented of the triple-differential cross section for inclusive isolated-photon+jet events in pp collisions at root s = 8 TeV as a function of photon transverse momentum (p(T)(gamma)), photon pseudorapidity ... -
Measurements with silicon photomultipliers of dose-rate effects in the radiation damage of plastic scintillator tiles in the CMS hadron endcap calorimeter
(Iop Publishing Ltd, 2020)Measurements are presented of the reduction of signal output due to radiation damage for two types of plastic scintillator tiles used in the hadron endcap (HE) calorimeter of the CMS detector. The tiles were exposed to ... -
Mechanical properties of graphene oxide-polyacrylamide composites before and after swelling in water
(Springer, 2018)Polyacrylamide (PAAm) hydrogels have been proposed for use as promising biomaterials in biomedical and tissue engineering but their poor mechanical and water-retention properties have hindered their development. Graphene ... -
Mechanical stability of the CMS strip tracker measured with a laser alignment system
(Iop Publishing Ltd, 2017)The CMS tracker consists of 206m(2) of silicon strip sensors assembled on carbon fibre composite structures and is designed for operation in the temperature range from -25 to + 25 degrees C. The mechanical stability of ... -
Melamine-based poly(azomethine) hydrogels: Mechanical, biodegradability, drug loading and antibacterial properties
(Pergamon-Elsevier Science Ltd, 2018)In the present paper, a new series of biodegradable poly(azomethine) gels were prepared to investigate the usability as biomaterials. The structures of the hydrogels were characterized by using FT-IR and SEM analyses. ... -
MENTAL WORKLOAD (MWL) MEASUREMENT OF OFFICERS IN SIMULATED SHIP NAVIGATION:DETERMINING THE REDLINES OF PERFORMANCE
(ROYAL INST NAVAL ARCHITECTS, 2022)The main aim of this study is to measure the mental workload of the operators according to the increasing workload during simulated ship navigation and it is aimed to contribute to the clarification of upper redline of ... -
A methodological extension to human reliability analysis for cargo tank cleaning operation on board chemical tanker ships
(Elsevier Science Bv, 2015)This is an article that conducts an empirical human reliability analysis for tank cleaning process on-board chemical tanker ship to enhance safety and operational reliability in maritime industry, providing a methodological ... -
Mid-infrared optical coherence tomography as a method for inspection and quality assurance in ceramics additive manufacturing
(Elsevier, 2022)In the past decade, significant progress has been made in ceramics additive manufacturing (AM). Material research and the rapid evolution of high-resolution printing technologies enabled the production of high-quality, ... -
Mixed higher-order anisotropic flow and nonlinear response coefficients of charged particles in PbPb collisions at root s(NN)=2.76 and 5.02 TeV
(Springer, 2020)Anisotropies in the initial energy density distribution of the quark-gluon plasma created in high energy heavy ion collisions lead to anisotropies in the azimuthal distributions of the final-state particles known as ... -
Modeling of Methane Distribution in a Landfill Using Genetic Algorithms
(Mary Ann Liebert, Inc, 2009)Landfill gas (LFG) results from the biologic decomposition of municipal waste and consists of mostly methane (CH4) and carbon dioxide (CO2), as well as trace amounts of a variety of other compounds. In this study, the major ... -
Modeling of twin-turbine systems with vertical axis tidal current turbine: Part II-torque fluctuation
(Pergamon-Elsevier Science Ltd, 2011)We recently showed the advantage of using a numerical system to extract energy from tidal currents by developing a new twin-turbine model (Li and Calisal, 2010a). Encouraged by this result, we decided to use this model to ... -
Modeling of twin-turbine systems with vertical axis tidal current turbines: Part I-Power output
(Pergamon-Elsevier Science Ltd, 2010)Recent interest in the tidal current industry has driven development of the prototype from the stand-alone turbine to the twin-turbine system. In this paper, we develop a numerical model to systematically analyze the ... -
Modeling, Simulation and Analysis of Bipolar Driven BLDC Motor
(Institute of Electrical and Electronics Engineers Inc., 2021)This article reviews modeling, simulation, and performance of a bipolar driven BLDC motor. The study aims to contribute to the performance analysis of the motor by suggesting a detailed model of the considered BLDC motor ... -
Modelling of wave generation in a numerical tank by SPH method
(Springer, 2020)There have been many mathematical and physical modelling strategies to represent a numerical wave tank that can generate the desired wave spectrums. Presently, one of the recent methodologies that have certain intrinsic ... -
The Moderated Influence of Ethical Leadership, Via Meaningful Work, on Followers' Engagement, Organizational Identification, and Envy
(Springer, 2017)This study examines a proposed model whereby ethical leadership positively influences the level of meaning followers experience in their work, which in turn positively impacts followers' levels of work engagement and ... -
The moderating roles of technological self-efficacy and time management in the technostress and employee performance relationship through burnout
(Emerald Group Publishing Ltd, 2020)Purpose The ongoing dispute as to whether using technology extensively at work may cause harm continues to gain momentum. Thus, the need for more research on the harmful effect of using technology at work and on the indirect ...